mpMINIPURE SUPER HIGH OTO
General
Applicable to laboratory, analyzers , biochemistry , hormon-elisa tests , reseach , QC , rinsing
SUPER HIGH OTO produces CAP , NCCLS , ASTM ve ISO 3696
(TYPE 2 ve TYPE 3) up to 1000 liters per day from tap water directly.
APPLICATIONS
- General lab analysis
- Autoanalyzers
- AAS
- Final rinse
- Autoclaves
- Test chambers
- Buffer preperation
- Culture media
- Photometer
- Spectrophotometer
- Sitology
- Pathology
- Histology
- Elektrophoresis
MPMINIPURE SUPER HIGH OTO
- Flushable mechanical filter reduces cartridge consumption
- Automatic external softener reduces hardness of tap water and prolongs life of RO membranes
- High capacity combined activated carbon + 5 micron cartridge holds particles , organic matter and free chlorine
- Qualified RO pump feeds RO membranes with consistingly high pressure hence rejecting 97% of ions and 100% of particles,organic matter and bacteria in softened and filtered water, dirty water is sent to drain
- Purified water is collected in external 85 liter capacity PP wheeled pure water tank
- Special magnetic level sensors stops production when tank is filled with purified water, Low level sensor also protects pure water pump , if there is no water in the tank
- Purified water in the tank is delivered with adjustable pressure to mixed bed resin tanks
- Two tanks , filled with mixed resin holds ions in the purified water and provide ultrapure water at the outlet on the front panel and the back
- User can obtain ultrapure water in speed due to pure water pump
- Optional 0,2 micron filters placed on the outlet valve holds bacteria and endotoxins
- Each MPMINIPURE is equipped with very reliable MES RO/DI CONTROLLER 08
- Microprosesor electronics controls internal tank , stops the production when full and activates again when Water level is reduced
- Flushes the membranes
- Alarms when there is no water in the tank and protects pure water pump
- Activates the pure water pump ,if the water level is suitable
|
|
||||||||||||||||||||||||||||||||||
*Different capacity pure water pumps are available as options Specifications are subject to change without notice under light of continous improvements.
|
|||||||||||||||||||||||||||||||||||
Microprossesor control panel controls all functions of the purification steps , protects system components , like pumps prolons life of membranes by time programmed flushing ( discharging longwaited dirty water ) and provides economy.
System flushes out with programmed time and FLUSHING signal apperas on the screen. Flush selenoit valve is fully opened and dirty water waited in the membranes flushed out speedy.
System starts production at the end of the flushing cycle , if storage tank is empty ve fills the tank. Manometer in front of the unit must show a value. Pure water conductivity is dispayled on the panel. EMPTY is displayed if there is not enough water in the tank . EMPTY dissapears , when water level reaches to safe level for the pure water pump.
FULL is displayed when the internal/external tank is full. Temperature and pure water quality is displayed .Manometer must show ‘’0’’.
Unit starts production when water level falls down upper level sensor, and waits for the programmed time . Flushes and continues the production.
LOW PRESSURE appears on the display if combined filter is clogged or inlet pressure is below the adjusted limit of pressure sensor, and alarm sounds. Unit waits for the programmed time , and returns to production if pressure rises above limit value . Otherwise alarm appears and sounds again.
EMPTY signal appears and alarm sounds if water level in the tank drops below low level sensor and pure water pump does not operate. As bekleme appears and waits for programmed time when water level rises above low level sensor. Pure water pump can be used to withdraw pure water
USERS MENU
Operator may program time duration of HL WAITING , FLUSHING , ALR WAITING , TEMPERATUE ALARM , LL WAITING and LANGUAGE
Time can be adjusted individually for each function with 30 , 60, 90 ,120 , 150 , 180 , 210 , 240 , 270 , 300 second intervals..
Language may be chosen as English or Turkish
You can enter MENU by pressing MENU/ESC buton , left and right buttons select parameters , up and down buttons select time values. ENTER buton confirms programmed value.